Equipment - Waterski - Extended Pylons

Skylon Sky Rack Wakeboard Rack

Attaches on your extended pylon to store your wakeboards up and out of the way! Holds 4 boards with or without bindings (or 2 skis and 2 boards). Installs in seconds with exclusive hinge/thumb screw design. The attachment area (coated with a rubberized non-slip coating) will not scratch your pole. Made of super hi-strength polyethylene and weighs only 6.8 lbs. Available for 2-1/2" or 3" extended pylon poles. Black.<!--last updatedby franco 020403 10:55am-->

Joystick Pro Series Extended Pylon

Designed for tournament style ski boats with an existing factory ski pylon. Made from 6061 aircraft aluminum, it's built solid for safety and years of enjoyment. Super stiff, no-flex design improves rider performance and delivers more air. Plastic coated set pin provides three adjustments, 6', 6.5' and 7', are the best heights for wakeboarding. Dual form fitted sleeves protect your pylon by eliminating any side-to-side movement. Lower ski eye allows you to enjoy skiing without removing the pylon. Bow harness is 1/4" aircraft cable mounted into the pylon connected to a 6000 lb. non-stretch U.V. resistant strap with a 4300 lb. anti-slip ratchet. Nose strap is 2" Kevlar filled sling that wraps around the bow and won't damage your gelcoat or dent your fender rails. Black.Due to the size/weight, this item ships UPS Ground at the regular shipping rates to arrive in 1-5 business days. <! – Last Updated by Jet – 03-28-03 – 11:15pm -- >

Extended Pylons

The Phat Pole one-piece Skylon is 6' tall with 3" outside diameter (OD) - fits 2 1/2" OD pylons- tall for huge air but not tall enough to sway your boat and wash out that perfect wake. Sleeved to fit tight while protecting your pylon. Held secure with 5000# cable/strap assembly. Quick and easy to install. Ratchet buckle gets it tight - and it stays tight! Features mounted ski eye at 3' height for low line activities. The original Skylon 2-piece has all the features above plus a telescopic non-rattle design - adjustable 6-1/2 to 7-1/2 feet. You choose your ride. Breaks down for easy storage. 2 piece top section is 42" x 2-1/2" OD. Bottom section is 40" x 3" OD. For use on factory installed pylons only. <!-- Last updated by franco 020503 11:47am-->

The Pod" Extended Pylon For I/O's and Outboards

For I/O's and Outboard boats 16' and longer. By Skylon. Available in one piece (7 ft.) or two-piece model (which features removable top section (33-1/2"), leaving a 54" tri-pod pylon with mounted Ski Eye). Stainless steel arms adjust from 41" to 66". A 5000# cable/strap assembly takes up the rearward pull. Once installed the pod can be removed in less than a minute with three quick release pins, leaving only a 6" diameter flush mount base plate. 2-1/2" OD.<!--last updated by franco 032803 3:51pm-->

Skylon 2-Piece Custom Color Fat Pole

For tournament ski boats with a factory installed pylon. Official pylon for the INT League and the US Open, it will help you get huge air and increase hang time for the big tricks that will make you look like a pro. Built tough using 3" OD, thick wall 6061-T6 aircraft aluminum that won't flex. Sleeved to fit tight while protecting your pylon. Held secure with 5000# cable/strap assembly. Quick and easy to install. Features mounted ski eye at 3' height for low line activities. Breaks down for easy storage. Available in these custom colors: White, Polished Aluminum, Red, Blue Purple, Yellow or Forest Green. Drop shipped from factory. Allow 2-3 weeks delivery.<!-- Last updated by franco 020503 11:37am-->